• Bienvenue sur Gate Automation !
  • +212 522 703 314
  • Rue Soumaya Résidence Shehrazade III N° 22 Palmiers, Casablanca

YUHAI-2M2280

YUHAI-2M2280

Key Features: 1? AC80 to 220V Supply Voltage 2? H-Bridge, 2 Phase Bi-polar Micro-stepping Drive 3? Suitable for 2-phase, 4, 6 and 8 leads step motors, with Nema size 23 to 42 4? Output current selectable from 1.7~ 6.6A peak 5?Current reduction by 50% automatically, when motor standstill mode is enabled 6? Pulse Input frequency up to 200 kHz 7? Optically isolated differential TTL inputs for Pulse, Direction and Enable signal inputs 8? Selectable resolutions up to 12800 steps 9?Over Voltage, Coil to Coil and Coil to Ground short circuit

Electrical Indicators

Parameters

Min

Typical

Max

Unit

Output Current(Peak)

1.7

-

6.6

Amps

Supply voltage

80

110

220

VAC

Logic Input Current

7

10

16

mA

Pulse input frequency

0

-

200

KHz

Low Level Time

2.5

?sec

Environment indicators

Cooling

Natural Cooling or Forced Convection

Environment

Space

Avoid dust,oil frost and corrosive gases

Ambient Temperature

0?-50?

Humidity

40-80%RH

Vibration

5.9m/s2 Max

Storage Temp.

-10?-80?

Weight

Approx.1.5 kg

Shape Dimension:unit=mm

YUHAI-2M2280

noticeEnsure well ventilatcd when install the drive. regularly check the cooling fan in normal operation.Ensre that the distance between is not less than 5cm;when multiple drivers are parallcl used in the cabinet. ground terminals must be cnnected well between driver and equipment,in order to ensure the safety of usage

Nous offrons des services de bonne qualité à nos précieux clients.